Hi there,

I'm new to the forum (freelander owner) and have a question I'm hoping someone can answer regarding the multi-plug that connects to my ABS module.

I am halfway through a shuttle valve bypass procedure to cancel the 3 amigos and have got as far as removing the shuttle valve from the bottom of the module. I am now attempting to connect the wires to the earth cable, but do not have the yellow/green cable on the multi-plug as many of the Disco instructions guides point to. I have a 13 pin multi-plug with 10 wires feeding into it. Could anyone tell me which one of these is the correct cable to use?

Thanks so much in advance!