B

bigjak

Active Member

• Sep 11, 2016

• #1

Can you replace/check the bulb in a hazard switch?
My hazards work but the light in the switch doesn't light. Neither does the indicator warning when the hazards are on but the switch is the main tell tale, right?

 

gazman

Well-Known Member

• Sep 11, 2016

• #2

on a td5 you can get at the bulb. No idea on other variants. on mine the hazards operate the indicator warning lights.

On mine all the indicators go through the hazard switch and won't work without it

 

mick the builder

Well-Known Member

• Sep 11, 2016

• #3

i had this on mine and it was easier/ cheaper to fit new ebay switch.( 88 110)

 

zeaphod

Well-Known Member

• Sep 12, 2016

• #4

On some of the hazard switches there's a wire/contact for the lamp in the switch, check your connections. It's possible to take the switch apart, but it's not designed to be, so you could completely fubar it. Buy a new switch and put a new bulb in your dash.