colinw

New Member
ihad a sort of grinding noise coming from 1 of my wheels (drivers side).put it back to where i got it and they said it was a high spot on the rear brake drivers side.it was also in to get new back diff rubber bushes fitted(2 drive shafts and prop ).got it back but noise has reappered ,only after a few miles and only whan turning to the left and going straight any ideas as to what the problem is?
 
yup - the problem is yo garage dont know **** all - take it back and tell em that they havent fixed the problem and to do the job proper and that yu will keep bringing it back fur FOC fixes until they do the job rite! If not then yu will speak to trading standards.
 
took the rear brake drum off an lo an behold they never bothered to clean the drum off rust an brake deposits.took me sometime but ill let you know if its cleared up the problem thanks 4 the reply to my problem.
 
just goes to prove, if you diy you save money , get to know your motor, and know the job has be done
 
well that seems to have done the trick so wont be going back to garage to get things done in the future diy if not othr garage
 

Similar threads