AKeeNShoT said:

Hi again folks, sorry I haven't been around for a while I've been drifting in the background, whilst repairing the motor.

So two weeks ago, I replaced drop links, various bushes and mounts for a wobble on heavy acceleration, felt through the gear knob and the whole car at 3-4k in 3rd gear, and various knocks on speed bumps.

And last week the diesel pump and filter.

Anyhow, got the car up again, wheels off again, and noticed the n/s inner cv boot was split, almost 360 degrees, and spunked its guts all ower the shop.
Although its still a bit juicy, I've noticed the rollers are still present, but there is about 1mm of play if I grab it and shake it. I'm aware the some play is acceptable but how much exactly.
Would a split cv boot cause this vibration, I don't think so, but I can't be sure.
I had already decided to replace the driveshaft before coming here, so I'm not sure what I'm expecting really, maybe sympathy or something.

(Can I just say, it ain't like me to ask for help on a matter like this, I've searched and searched and ultimately, can't find a part number for a GKN driveshaft for a 2005 TD4)


Any tratter girls got a jerry can?

Click to expand...

AKeeNShoT said:

What year is your V6 mate? From my research ont web, inc on here, I've heard that the cheap shafts are rubbish, and will also vibrate, as on oem there is a button bearing setup to include up and down movement on post 2003-4 shafts which the cheap aftermarket parts do not include.
I am however insanely interested in your findings, and until then will withhold spending money.
How much play did you have if you don't mind me asking, as, for all there is no apparent play in mine with force, if I grab it, and move it quickly it does move a little, defined by a very very small rattle, I was initially hoping that a new boot and regrease would suffice, but I can't see a shot boot causing the heavy vibration.
I was hoping a saviour would be able to tell me otherwise, and save me having to buy a new GKN shaft.
I just hope that my IRD bearings aren't shot, as I've read a few posts on here where they have been.
Would you mind keeping me in the loop mate ;-)

Click to expand...

AKeeNShoT said:

I'm sure it will last the two years, however from my searching for info, it won't stop the vibrating. Thus putting increased pressure on other parts like the ird and engine mounts.
I'm still holding off repair until you've done it, or at least until someone else feeds back.
Cheers for the reply.
Mick

Click to expand...