clutchdust
Well-Known Member
easy job..........4 screws on the top of the grille, 2 screws in the wheel arches on each side which secure the arch trim to the bumper, 2 screws (on each side) underneath which hold the lower part of the wheel arch liner to the bumper, 2 screws where the under tray goes on, take off a square plastic cover from up inside the wheel arches, pull the arch liner out from behind the bumper and there are 2 10mm bolts (1 on each side) which secure the bumper to the wing and 3 or 4 (cant remember!) plastic trim clips under the number plate, give it a yank and it'll come off
where from?
wot make?
how much?
not sure its a good idea to put oil cooler rad infront of A/C radiator, as it would mean that hot air is being passed thro the A/C rad. Not so efficient cooling.
wot make?
how much?
not sure its a good idea to put oil cooler rad infront of A/C radiator, as it would mean that hot air is being passed thro the A/C rad. Not so efficient cooling.
dearot
New Member
There was one compact engine cooler on ebay but it already ended 
For me in Oz, sometime it is cheaper to get stuff from US even with delivery charges.
Just put a small oil cooler so you wont block the whole A/C rad. I would say you put just infront of A/C, can screw together with power steering oil cooler.
For me in Oz, sometime it is cheaper to get stuff from US even with delivery charges.
Just put a small oil cooler so you wont block the whole A/C rad. I would say you put just infront of A/C, can screw together with power steering oil cooler.
K - i cant say i have studied it in detail.
