Im wondering if some kind member could help me please.

We have a FL2 s model, 2011 which we've had about 3 months, when we bought it the stereo powered up & turned straight back off again.

We have found out that we have the wrong head unit in our vehicle, we have the highline one & should have the basic one.

We have a kenwood head unit & we have bought the wiring harness's & aerial adaptor to fit & we've plugged it all in & we have no power to the head unit. Do we need to do something else?

Thanks in advance

Mel

Hi Mel did you get this sorted?

You'll need to wire in a power source from ignition as the factory unit is turned on from a network message not an ignition feed