B

Bangalore90

New Member

• Aug 25, 2013

• #1

Fellow men,

I went to change the bulb in my ex mod defender 90 and as a unscrewed the single cluster i realised there was no bulb in there, and then realised there was no connecter for the bulb contained within the housing.

Although this is a 90 its had some Wolf upgrades the rear lighting set up being one of them.

Does anyone have any ideas why there doesn't seem to be a reverse light. When i can figure out how to attach a photo of the rear i'll put one up.

Cheers,

Bangalore

 

Hippo

Lord Hippo

• Aug 25, 2013

• #2

http://www.landyzone.co.uk/lz/f38/picture-posting-dummies-47795.html

 

B

Bangalore90

New Member

• Aug 26, 2013

• #3

http://www.flickr.com/photos/95082968@N07/9599451325/

This is the picture of the rear light layout. Still can't figure how to get straight up as a picture...!!!!!

 

Last edited: Aug 26, 2013

timtheenchanteruk

Well-Known Member

• Aug 26, 2013

• #4

other than that, not a clue, apart form somone thought it looked good, not sure why there would be no holder or owt, even if it had just been left dissconnected...

 

B

Bangalore90

New Member

• Aug 26, 2013

• #5

Hi Tim,

Thanks for getting the picture up!

Do you know which one it should be??

Cheers

 

sp00k

Well-Known Member

• Aug 26, 2013

• #6

Is it ex-mod, if so they do not have a reverse light wired. Sounds like someone has put a light on without going to the trouble of wiring it.

Mine is ex-mod and instead of reverse lights, I wired up manually switched rear worklights. They turn night into day. When I turn them on, people seem to quickly get the idea and get the hell out of my way sharpish,

 

B

Bangalore90

New Member

• Aug 27, 2013

• #7

Ummmmm food for thought...