It's fairly simple to replace the diff input flange oil seal.
just drop the tail end of the rear prop - no need to take it right off.
Undo the big nut in the centre of the flange (leave both wheels on the ground if you can), pull off the flange. then prise out the old oil seal, clean up and push in the new one (keeping it square).
re-assembly is the reverse!
thats why ill be expecting several nights work on it!Yeah, wot 'ee sez, but if it goes that smoothly there's definitely something wrong with the world.![]()
And some standard issue landrover swearing I suspect?a big screwdriver and a large socket to tap the noo seal in.