ozm29c
New Member
Fellows,
After replacing my 300TDI cylinder head for the 2nd time in only 2000kms


and after the low water level sensor failed to activate (again), I have been looking at fitting an engine watchdog TM2. See;
ENGINE WATCHDOG TM2, Engine Overheating Alarm, Gauge & Sensor
Has anyone out there had any experience with this unit? Effectively the engine watchdog monitors the engine metal temperature and can be adjusted to a max alarm set point that reflects what you are doing with your disco ie towing a horse float etc.
My disco regularly operates in 30C - 40C temps so I am hoping that this device will give piece of mind.
Thoughts please????
BTW I have fitted a new radiator,waterpump, thermostat, radiator and heater hoses, pressure tank and cap.
After replacing my 300TDI cylinder head for the 2nd time in only 2000kms
ENGINE WATCHDOG TM2, Engine Overheating Alarm, Gauge & Sensor
Has anyone out there had any experience with this unit? Effectively the engine watchdog monitors the engine metal temperature and can be adjusted to a max alarm set point that reflects what you are doing with your disco ie towing a horse float etc.
My disco regularly operates in 30C - 40C temps so I am hoping that this device will give piece of mind.
Thoughts please????
BTW I have fitted a new radiator,waterpump, thermostat, radiator and heater hoses, pressure tank and cap.