johnyelland1234
Member
Hi all,
Just had to remove my pass side exhaust manifold to fit a shiny new Steve Parkers exhaust.
In order to do this I removed the HT leads and the metal clip stuck to the spark plug.
I removed all of the leads from the engine and bought a new rotor arm and dizzy cap, with new HT leads. (Rover 3.9 3.5 V8 Blue Distributor Cap & Red Rotor Arm & Blue 8mm HT Lead | eBay)
The numbers weren't on the leads and was a bit of a guessing game.
I followed the rave diagram but it still wont start.
Car started fine before taking the leads off (with some choke till warmed up) and has been sat for around 3 months.
--------------
So, is there anyone in Norfolk near the Kings Lynn/Narborough/Pentney area that fancys a quick 30 quid? Just get the car firing in the right order and starting and i'll be well happy.
I'm hoping to get it through its MOT next month
Just had to remove my pass side exhaust manifold to fit a shiny new Steve Parkers exhaust.
In order to do this I removed the HT leads and the metal clip stuck to the spark plug.
I removed all of the leads from the engine and bought a new rotor arm and dizzy cap, with new HT leads. (Rover 3.9 3.5 V8 Blue Distributor Cap & Red Rotor Arm & Blue 8mm HT Lead | eBay)
The numbers weren't on the leads and was a bit of a guessing game.
I followed the rave diagram but it still wont start.
Car started fine before taking the leads off (with some choke till warmed up) and has been sat for around 3 months.
--------------
So, is there anyone in Norfolk near the Kings Lynn/Narborough/Pentney area that fancys a quick 30 quid? Just get the car firing in the right order and starting and i'll be well happy.
I'm hoping to get it through its MOT next month
