oakey

Well-Known Member
Full Member
1995 V8 200k
I have been getting problems with FL and RR sensors out of range intermittently for a while
Thinking of cutting out connectors.
Anyone done this?
Worth it?
Ta for opinions
 
Yes but Dont think the sensors go through there tho ta for reply
 
Earlier ones can be swapped from one side to other and recalibrated I believe. The sensor track wears and can produce a dead spot. Swapping to the other side gives access to unworn track.
 
Last edited:
Post 97 can be swapped side to side.

Worth checking the sensors with an multimeter, especially if they were cheaper sensors.
 
Sorry I thought was 99 thank you
Cant remember the brand but they came from Island 4 x 4
Seems to be only the two that give problems and they were replaced together cos old ones had same problem.
Very soon after starting I drive over a very rutted far track, could this be the problem?
When I leave work and I am on a normal road it seems to be ok
 

Similar threads