kermit_rr

Very

Full Member

• Oct 4, 2020

• #1

Because i could see the car was obviously not level, with the front left being higher than when i parked and the others being different states of lower, i plugged the nano in..

I then set to standard height via nano and once it had finished leveling..

Eventually it changed to dormant status, but rear left valve still showed as open and i saw the following height readings..

I'm confused as is the landy! Any ideas what's going on?

 

Henry_b

Think outside, no box required.

• Oct 4, 2020

• #2

Calibrate it.

If she's on the píss

 

kermit_rr

Very

Full Member

• Oct 4, 2020

• #3

Henry_b said:

Calibrate it.

If she's on the píss

Click to expand...

I have! And it wasn't like that when i parked it!

 

kermit_rr

Very

Full Member

• Oct 4, 2020

• #4

I don't see how the front left could increase in height overnight

 

pete12345

Well-Known Member

• Oct 4, 2020

• #5

Are you sure the back hasn’t sunk one side

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Oct 5, 2020

• #6

kermit_rr said:

I don't see how the front left could increase in height overnight

Click to expand...

Didn't @pwood999 have something like that recently?

 

kermit_rr

Very

Full Member

• Oct 5, 2020

• #7

Grrrrrr said:

Didn't @pwood999 have something like that recently?

Click to expand...

Must have missed it

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Oct 6, 2020

• #8

kermit_rr said:

Must have missed it

Click to expand...

Pretty sure he had something lifting overnight and traced to a leaking exhaust valve.

 

kermit_rr

Very

Full Member

• Oct 6, 2020

• #9

Grrrrrr said:

Pretty sure he had something lifting overnight and traced to a leaking exhaust valve.

Click to expand...

Could be. Not done it since!!
One valve showing as open while in dormant state was odd though! And no error codes

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Oct 6, 2020

• #10

kermit_rr said:

Could be. Not done it since!!
One valve showing as open while in dormant state was odd though! And no error codes

Click to expand...

Don't recall seeing that, to be honest. I'll have to get the Nanocom out and have a play at some stage.

 

kermit_rr

Very

Full Member

• Oct 6, 2020

• #11

Grrrrrr said:

Don't recall seeing that, to be honest. I'll have to get the Nanocom out and have a play at some stage.

Click to expand...

I forgot to take a pic

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Oct 7, 2020

• #12

kermit_rr said:

I forgot to take a pic

Click to expand...

It is starting to ring bells now but maybe it is your pics above. Fortunately I have not needed the Nanocom in ages.

 

pwood999

Well-Known Member

Full Member

• Oct 7, 2020

• #13

Grrrrrr said:

Didn't @pwood999 have something like that recently?

Click to expand...

Mine was rising at the rear. Eventually traced it to a combination of weak Inlet & Corner valve springs, plus valve plunger rubber faces gone hard because they're 20 years old. New set from Kurt has helped a lot. Still not perfect but useable and good enough to now need messing with.