mozz smith

mozz smith

Well-Known Member
:(:(:welcome2:hi lads my mate is stuck in the middle of the sticks in lincolnshire :(can you help . he has a n reg 4.6 hse rangie yesterday he towed a small trailer for a couple of miles then when he got up this morning his airbags are not inflateing there is no leaks anywhere ?? on the dash when he turns ignition on it reads ( SLOW 35 MPH EAS FAULT ) so can u help and let me know how to clear fault , will it help if he undos the battery then reconnect or unplug the becm box if so how is that done ..any help would be really apprecieated and then i can relay info to him via phone as he has no computer ,, thanks lads in anticipation ..manchester mozz:):):)
 
If there are no leaks why has the suspension dropped? None inflation usually means no air pressure. It has been said on other forums that disconnecting the battery for thirty minutes will reset the EAS ECU. But i have never tried this. If he tries this make sure he has his EKA code handy and knows how to apply it.
 
thanks wammers ,how do you apply the eka code ,and is this the 4 digit no that comes with the car ? cheers wammers .mozz
 
hi wammers , my mate has just told me that yesterday when he hooked trailer up he lowered susspenson on the car using switch on dash , down to meet the trailer height then car lowered and then stayed at lower level and then fault sign showed on dash and still there and susspendsion still at lower height ?????? cheers mozz
 
Engine running, close all doors, tailgate, make sure trailer unhitched, then use switch to raise height again; probably stuck in "memory" with trailer socket wired-up......had this before with mine!
 
mozz smith said:
hi wammers , my mate has just told me that yesterday when he hooked trailer up he lowered susspenson on the car using switch on dash , down to meet the trailer height then car lowered and then stayed at lower level and then fault sign showed on dash and still there and susspendsion still at lower height ?????? cheers mozz
Click to expand...

Towing should be done with EAS locked in standard mode. Sounds like there is no air or a faulty sensor. You will have to clear fault before investigate what the problem is. Nothing will happen with EAS locked and message on dash.
 
hi wammers , hes tried taking battery off for 40 mins put back on and still showing fault 35 mph tried raising height and lowering but nothings happening ?????
 
mozz smith said:
hi wammers , hes tried taking battery off for 40 mins put back on and still showing fault 35 mph tried raising height and lowering but nothings happening ?????
Click to expand...

Disconnecting the battery will not clear an EAS hard fault. It's either an EAS kicker from BBS or download the EAS unlock suite to clear the fault.
The suspension will not move until you clear the fault.
 
:welcome2:hi keith , once again you always come up with the answer :) get yerself a glass of wine or 2 :D cheers matey ,,mozz:):):)
 
You must log in or register to reply here.

Similar threads

P
L322 ABS HDC faults
Replies
6
Views
778
roythebus
R
D
RSW EAS free version problem commination with car
Replies
9
Views
810
pwood999
pwood999
M
P38 new problem with abs and traction fault
4 5 6
Replies
119
Views
7K
Datatek
Datatek
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
2K
DollyBird
DollyBird
C
Sat Nav Screen powering on then off, and repeat for random times.
Replies
8
Views
1K
Chummers
C