Maddogtrev

Member

• Jun 29, 2013

• #1

Hi been away from the forum for a short time as not had a discovery but have been and bought another one with the following problem
If you lock the drivers door with the fob or key it opens its self and all the other doors too if I disconect the drivers door locking servo all the other doors lock ok with the fob and I have to lock the drivers door with the key
so do I need new drivers door locking servo or am I missing somthing?
all help will be appreciated and thank you in antisipation

 

discool

Well-Known Member

• Jun 29, 2013

• #2

Bounce back Try readjusting the actuators mounting plate a few "mm" each way and try locking/unlocking each time u move the plate.

 

Maddogtrev

Member

• Jun 29, 2013

• #3

Hi and thanks will give this a try when I get home from work today

 

hoopfish

Well-Known Member

• Jun 29, 2013

• #4

Had this on mine,sprayed a load of wd40 down the locking arm thing,pulled back the button on the top of the door and sprayed untill it started dripping out the bottom of the door.Do that to all the locks,it fixed mine!.

 

Maddogtrev

Member

• Jun 30, 2013

• #5

Hi thankyou discool I moved the plate about 3 mm towads the door lock and it now locks and stays locked
But it only stays locked if I lock with the key or fob if I push the butten down on the door it locks and then unlocks strate away is this normal

 

Last edited: Jun 30, 2013

discool

Well-Known Member

• Jun 30, 2013

• #6

Maddogtrev said:

Hi thankyou discool I moved the plate about 3 mm towads the door lock and it now locks and stays locked
But it only stays locked if I lock with the key or fob if I push the butten down on the door it locks and then unlocks strate away is this normal

Click to expand...

Normal if the door is open