S

sash

New Member

• Dec 17, 2011

• #1

:blabla: hi everyone, anyone know where the low tension Blue and red wires come from that feed the distributor on a 3.9 dico, used to be a disco but that was when it actualy moved!
Please help.

Steve

 

sparky steve

Active Member

• Dec 17, 2011

• #2

sash said:

:blabla: hi everyone, anyone know where the low tension Blue and red wires come from that feed the distributor on a 3.9 dico, used to be a disco but that was when it actualy moved!
Please help.

Steve

Click to expand...

more details please disco 1,2,3??
age ect

 

alexdon

Active Member

• Dec 18, 2011

• #3

If it is a D1 they come from the ignition module which is between the coil and distributor. There should be 2 white wires going into it.

 

discool

Well-Known Member

• Dec 18, 2011

• #4

For those who don't know only a D1 3.9 has a distributor, information supplied in the OPs post. Same for other LRs with a similar engine.

The blue wire from the distributor goes to terminal 1 of the ignition module and the red wire to terminal 3 on the module, terminal 2 is spare.
The two white wires on the other side of the module go to the coil.

 

Last edited: Dec 18, 2011