CanAmSteve
New Member
I'm thinking of adding a second battery to my Disco 2 and it appears you can fit two Optimas in the stock location if you move the ECU and jack.
I'm considering putting the ECU in under the dash using an extension loom, but are there any opening in the bulkhead big enough to pass those monster connectors through?
My thoughts are the ECU is safer (and drier) in the passenger compartment, plus it should help reduce the oil I have leaking out the existing connectors affecting the ECU.
But I'm concerned how I'll get the connectors through the bulkhead. Anyone done this or have any ideas?
I'm considering putting the ECU in under the dash using an extension loom, but are there any opening in the bulkhead big enough to pass those monster connectors through?
My thoughts are the ECU is safer (and drier) in the passenger compartment, plus it should help reduce the oil I have leaking out the existing connectors affecting the ECU.
But I'm concerned how I'll get the connectors through the bulkhead. Anyone done this or have any ideas?