Grrrrrr

Grrrrrr

Technician, Bodgit & Scarper Ltd
'95 DT.

The #4 injector has decided to leak. PITA. Sourced one but can someone remind me if I need a special tool to get the f*cker on without damaging it? Is there some sort of socket with a window, IIRC?
 
I have one of these.....

Sockets.jpg


Which has a 27mm x 85mm deep windowed injector socket on a 1/2" drive included....(as well as a 27mm shorter socket (74mm) for oil senders)

Welcome to borrow - will have to get it out of the 110 (which is in Farnborough at the moment - won't be able to get to it until Thursday when I am back in the office) but measure the depth first as the 27mm is only 85mm deep.
 
27mm x 85mm is fine. Used one when I changed engine in the be atch. Welcome to borrow it but probably won't get it for a couple of days due to royal snail mail. Unless your anywhere near Accy.
 
Thanks, chaps. I'm going to ask around and see what I can find but I might take you up on it yet.

How much was that kit, @Saint.V8?
 
You must log in or register to reply here.

Similar threads

Slooby
P38 2.5 DSE Spares or Repairs [SOLD]
Replies
14
Views
1K
Grrrrrr
Grrrrrr
L
Disco 4 SDV6 How to ascertain Engine swap compatibility
Replies
2
Views
777
biketeacherdave
biketeacherdave
C
L322 3.6tdv8 injector/fuel line woes and a mystery broken wire.
Replies
7
Views
2K
calskil
C
Ric82
Series 3 2.25 Diesel Timing Tool 605863
Replies
3
Views
1K
Ric82
Ric82
Forgotthelandinggear
Injector Pump leaking Diesel
2
Replies
27
Views
3K
tottot
tottot