L

landy90will

Member

• Mar 18, 2011

• #1

anyone know where to fit the t piece pipe to run a boost guage a boost guage ? theres a small about 5 inch pipe that goes into the wastegate on the the turbo from one of the air hoses below? but cant find this one that goes to the ecu?

 

L

lynall

Well-Known Member

Full Member

• Mar 18, 2011

• #2

That short pipe is it there is not a pipe to the ecu, the ecu gets its signal from a sensor located in the top middle of the inlet manifold, this measures boost pressure and air temperature.
There is another sensor behind the water pump area but i cant remember what its for.
You will want a fuel leak off t piece as right size and wont melt like screenwash one will!


Lynall

 

Shifty1962

Well-Known Member

• Mar 18, 2011

• #3

Or do it properly and take your boost reading from the inlet manifold.
The back of the inlet manifold has a steel core plug fitted that you can drill and tap.

 

L

landy90will

Member

• Mar 20, 2011

• #4

cheers guys sorted it thanks

 

saxmanuk

Active Member

• Mar 21, 2011

• #5

landy90will said:

cheers guys sorted it thanks

Click to expand...

How? what did you decide to do? photos please? as thinking of doing the same