Father TDCi
New Member
My problem started when I blew the fuse F9 on my 2.2 TDCi. When I replaced the fuse the alarm goes off as soon as I replaced the fuse but went off when I removed the fuse again. I also noticed at this point that there were no red dash lights to indicate the state of the alarm and the plip had stopped working. The fuse is central locking so I have disconnected all the central locking wires. I felt that the AS10 had been damaged and sourced a replacement which I have now fitted and although I can now replace the fuse without the alarm going off I still have no red light on the dash nor plip action. I have tried resetting the plip using my engine diagnostics box and just to cheer me up when it said press unlock 8 times the hazards flashed as they should have but once finished that was all I got. I still have no red light on the dash and cannot deactivate the immobilizer. I can turn the key fast and get the engine to crank until the immobilizer kicks in but it will always kick in and the engine never starts. The only fault reported by said diagnostics tool is a glow plug. Does anyone have any recomendations where to look next?