The car won´t crank. Giving M+S flashing and gear position is flickering. Also get Code P0705 position switch monitoring. The feed to xyz switch from BCU C663/10 is 0v.
Disconected xyx switch and measured all contacts, seams to be OK.
In Nanocom the "BCU reley power" is 0v. Also BCU ignition 1,2,3 al OFF.
IDM ignition is ON and battery reading 12,6v.
I suspect BCU is broken but want to make shure i didnt miss something.
What can cause BCU relay power to turn on/off?
If i get another used BCU, do i need its EKA code?
Could it be imobilized?
FOB and doors lock as normal.
Eny ideas is appreciated/thanks
Disconected xyx switch and measured all contacts, seams to be OK.
In Nanocom the "BCU reley power" is 0v. Also BCU ignition 1,2,3 al OFF.
IDM ignition is ON and battery reading 12,6v.
I suspect BCU is broken but want to make shure i didnt miss something.
What can cause BCU relay power to turn on/off?
If i get another used BCU, do i need its EKA code?
Could it be imobilized?
FOB and doors lock as normal.
Eny ideas is appreciated/thanks
