Zed.

Well-Known Member

• Sep 13, 2015

• #1

Hello all, I've had a little dig but not on the Disco,
recently I changed the gearbox & clutch on my '92 200tdi Discovery & when I test drove it the rev-counter had mysteriously died

I had a little fiddle with connectors under the bonnet on the alternator & n/s bulkhead (does the rev-counter get it's signal from the alternator?) but it no workie

is there a common problem with these?

I'm thinking either the wiring has got crimped somehow when re-fitting the 'box but it is not trapped in the bellhousing, maybe when the 'box was removed it was caught between the bulkhead & rocker-cover?

I've had a look in a haynes manual but the wiring diagram is of minor use & I didnt see mention of the rev-counter feed, so, is there a decent (online?) wiring diagram for a D1 / 200tdi available?

Thanks in advance.

Rich.

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Sep 13, 2015

• #2

My 300tdi rev-counter was fed off the alternator, spade connection that corrodes and falls off! Dunno if it's the same on the 200 ....

 

Zed.

Well-Known Member

• Sep 14, 2015

• #3

well, progress report......

bloody alternator packed-up today

ordered a new one.....


hope this sorts the taco...

Rich.

 

Zed.

Well-Known Member

• Sep 20, 2015

• #4

Zed. said:

bloody alternator packed-up today

ordered a new one.....


hope this sorts the taco...

Click to expand...

Well it's charging but no Rev-counter, will have a dog in the engines loom (strip old tape off & attack with a circuit tester)

Rich.

 

TezzDemon

Member

• Sep 24, 2015

• #5

I had this issue on my 300tdi,was a break in the wire from the alternator.Took me ages to find it as it was inside where a few wires had been taped together

 

jamesmartin

Well-Known Member

• Sep 25, 2015

• #6

Zed. said:

Well it's charging but no Rev-counter, will have a dog in the engines loom (strip old tape off & attack with a circuit tester)

Rich.

Click to expand...

you do have 3 wires to alt , battery feed to b+ warning light to d+ and rev feed to w+

 

Zed.

Well-Known Member

• Sep 26, 2015

• #7

TD, that's what I presume but I'm a bit busy / lazee / pre-occupied to have a look but now have a few days off so hopefully progress

jamesmartin said:

rev feed to w+

Click to expand...

thought so, thanks for the confirmation jm (same as wiring on my tdi converted wv's)

Rich.

 

Zed.

Well-Known Member

• Sep 28, 2015

• #8

Okey, revcounter fixed, there was a break in a wire (white / grey stripe?) BUT oddly enough it was old damage as the strands were corroded green
I know the disco had new clutch reasonably recently maybe within the last year or so so maybe it was trapped in the bellhousing (ok, I know this sounds like I am trying to say it wasnt me BUT I had cable-tied the loom up away before changing the gearbox as an attempt to avoid this sort of damage)

anyway, all fixed now & seems to have more power maybe less braking effect from the alternator as it has somewhere for the signal to go?? )

Rich.

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Sep 28, 2015

• #9

Nice one ..