Terry14121976
Member
Ranger rover vogue 2003 td6 3 litre 107k
Rr was running and starting ok
Only problem had hot start issue
So was told to change crank sensor
So I did car wood start but wouldn't rev above 1500rpm before getting really lumpy or cutting out
But wood restart straight away
And do same
After that I decided put old one back in same problems as above
Can u fit plug wrong way round as pins are in middle stupid question I know and when I removed first time sensor was only hand tight
Seems a bit strange as that's the only part I have touched diagnostics at garage says low fuel pressure which to me relates to lp pump which was changed which now they think is faulty
To me plug is probably wrong way round or position of sensor is not correct
I'm being sent a replacement lp pump
Had covers off no signs of an yleeks as is all bone dry under covers checked on start up and whilst running no obvious leeks
Any ideas
Rr was running and starting ok
Only problem had hot start issue
So was told to change crank sensor
So I did car wood start but wouldn't rev above 1500rpm before getting really lumpy or cutting out
But wood restart straight away
And do same
After that I decided put old one back in same problems as above
Can u fit plug wrong way round as pins are in middle stupid question I know and when I removed first time sensor was only hand tight
Seems a bit strange as that's the only part I have touched diagnostics at garage says low fuel pressure which to me relates to lp pump which was changed which now they think is faulty
To me plug is probably wrong way round or position of sensor is not correct
I'm being sent a replacement lp pump
Had covers off no signs of an yleeks as is all bone dry under covers checked on start up and whilst running no obvious leeks
Any ideas
