shiehhh

Member
I have a 2004 TD5 version 110 pickup truck, and I'm looking for a Powerboost brakes kit and Master cylinder kit. My car does not have ABS. Does anyone have recommendations on what models I should buy? Also, are the two screenshots I'm providing a match?


WechatIMG54.jpeg
WechatIMG55.jpeg
 
Have you made sure the calipers are in good order with all pistons free moving?
As above, the TRW set is fine for a general use truck.
 
If your brakes are in good condition you shouldn't need the LOF lkit.
Go with the TRW (OEM).
I've replaced all my brake calipers with new ones, and the brake lines are normal with no air inside. But the overall driving feel is that the brakes are very soft, so I'm wondering if I should replace the brake kit and cylinder kit.
 
Have you made sure the calipers are in good order with all pistons free moving?
As above, the TRW set is fine for a general use truck.
I've replaced all my brake calipers with new ones, and the brake lines are normal with no air inside. But the overall driving feel is that the brakes are very soft, so I'm wondering if I should replace the brake kit and cylinder kit.
 
It may be your master is somewhat worn and possibly having an issue with some fluid bypassing the piston internally, this will result in a soft feel. [ there may also be some air let into system]
As you are in there I recommend renewing both master and servo. It is important the set up is correct.
Guides of how to on Youtube.
 
Flush new fluid into your system as brake fluid is prone too deteriorate over time which could be the soft pedal condition you mentioned, & as above regards the brakes
 
It may be your master is somewhat worn and possibly having an issue with some fluid bypassing the piston internally, this will result in a soft feel. [ there may also be some air let into system]
As you are in there I recommend renewing both master and servo. It is important the set up is correct.
Guides of how to on Youtube.
Thanks for the suggestion. Can you confirm if the LOF kit and Master cylinder kit I initially mentioned are compatible? My car doesn't have ABS.
 
Thanks for the suggestion. Can you confirm if the LOF kit and Master cylinder kit I initially mentioned are compatible? My car doesn't have ABS.
No idea about LOF, have not used them.
I have replaced mine with the standard servo/master. Noticeable improvement over the old.
 
Thanks for the suggestion. Can you confirm if the LOF kit and Master cylinder kit I initially mentioned are compatible? My car doesn't have ABS.

You seem very keen on the LOF kit almost as if you have made up your mind already.

The TRW kit is the one you need, it was designed far and works well with the car.
It will also likely be better quality than the LOF
 

Similar threads