anubis757

Active Member

• Dec 10, 2020

• #1

Hello to All.
Does anyone know the dimensions of the td4 cooper washers.
I bought form the dealer 1 and its outer 1,5mm and inner 7mm.
I assume this are correct.
Can any one tell me where I can buy washers because 6 pounds one is ridiculous
Many Thanks

 

Nodge68

Well-Known Member

• Dec 10, 2020

• #2

anubis757 said:

Hello to All.
Does anyone know the dimensions of the td4 cooper washers.
I bought form the dealer 1 and its outer 1,5mm and inner 7mm.
I assume this are correct.
Can any one tell me where I can buy washers because 6 pounds one is ridiculous
Many Thanks

Click to expand...

I don't know the dimensions, sorry.
They are a silly price for what they are though.
I've taken my FL2 injectors out so often, I started buying the washers in bulk, but even getting them 10 at a time still works out as 89 pence each, which is still silly money. It's made worse by the fact they don't seem to seal very well, requiring them to be replaced almost straight away.

I'm going to anneal them before fitting next time, in attempt to form a perfect seal.

 

Last edited: Dec 10, 2020

Arctic2

Well-Known Member

• Dec 10, 2020

• #3

These are the ones i use on FL 1 TD4
BOSCH COMMON RAIL DIESEL INJECTOR COPPER WASHER SEAL | eBay

 

anubis757

Active Member

• Dec 10, 2020

• #4

Thank You much better than the deal i had...

 

J

Jayridium

Well-Known Member

• Dec 10, 2020

• #5

Arctic2 said:

These are the ones i use on FL 1 TD4
BOSCH COMMON RAIL DIESEL INJECTOR COPPER WASHER SEAL | eBay

Click to expand...

They look nice with a decent bit of meat to them, but at the risk of sounding like a skinflint - is that listing for a set of four washers or a price each?

 

anubis757

Active Member

• Dec 11, 2020

• #6

That's a very good question Jay....
Well I asked and the seller told me its 1 set of 4