P

pussa13

Active Member

• Jul 7, 2011

• #1

Afternoon all, can I have a bit of help,I have a 1989 90 2.5TD and I think my clutch fork has punched through, what is the best way to change it, box out or motor out? and do I put a new clutch in at the same time?
Thanks Russ.

 

jamesmartin

Well-Known Member

• Jul 7, 2011

• #2

i would fit new clutch kit and fit h/d fork or weld piece acroos your self on std fork ,remove gearbox if have access to engine crane through tunnel and swing out of way while you change clutch,

 

BearDy89

Well-Known Member

• Jul 7, 2011

• #3

Check out my thread
http://www.landyzone.co.uk/lz/f7/defender-gearbox-removal-clutch-replacement-pics-136171.html

mines a 300tdi but might be of some use?

 

P

pussa13

Active Member

• Jul 9, 2011

• #4

Thanks All for your help, off out to start it now, got all the bits, wish me luck!!
Thanks for your time.

 

bevhelee

Well-Known Member

• Jul 9, 2011

• #5

pussa13 said:

Thanks All for your help, off out to start it now, got all the bits, wish me luck!!
Thanks for your time.

Click to expand...

Good luck, I changed 1 a few months ago without lifting gear, I left the crossmember in place and it supported the box, then with a trolley jack lifted the box back into place.

Lee