L

LCA

New Member

• Sep 8, 2013

• #1

Hi
Im thinking of a new chassis and wondered what is involved in going from a 90(2.5N/A) wheelbase up to 110. i know i need a tub, propshaft, fuel tank relocation and loom can i get away with the original axle or must it be salisbury? id rather keep the landy i have now as a base as i have started with it.im assuming from the gearbox mount forward is the same on 90 and 110s? all advice appreciated for making decision.
LCA

 

Dr_evil

Banned

• Sep 8, 2013

• #2

well it would need re registering for a start……just sell the 90 and buy a 110

 

THEengineer

whatever

• Sep 8, 2013

• #3

op2:

 

SteNova

Well-Known Member

• Sep 9, 2013

• #4

option 1 - buy a 2nd hand bare 110 chassis with ID, put all your parts on it + any 110 only parts, sell your 90 chassis & id and any unneeded parts on ebay
option 2 - buy a full 110, fit any parts from yours which are nice/upgraded, sell yours

whats not an option... sticking your 90s id on a id less 110 chassis you got on ebay, if you get pulled and a check takes place expect to end up on a Q plate as a minimum

 

bluehaze

Well-Known Member

• Sep 9, 2013

• #5

Buy a knackered 110 and rebuild it using all your parts. Sell what's left including your chassis with ID.

 

landowner

Pensioner Pete

Full Member

• Sep 9, 2013

• #6

To answer one of your questions. yes they are the same from the seat box/gearbox mounts forward