discoboy84
New Member
this is a step by step of what I did, others may do it differently
i started by dropping the dickie seats (6&7) and gaining access to the clusters, i removed my red 300 tdi rear clusters and the temp lights i had put in place of my bumper ones (ripped off my rear bumper off roading ;P)
i then got hold of some cluster wiring plugs
and took them apart
and fitted two wires into my current block that were missing, i pulled the bumper wiring back up from the bumper and connected the wires, (green is indicator and red is tail light) to the plug ignoring the two black wires from the bumper,
these are all the pics i had taken will add more, i also have 8 wires left over for adding to your connector if anyone wants some pm me
PS use a thin screwdriver to remove the wires from the block (to open the hinged area)
i started by dropping the dickie seats (6&7) and gaining access to the clusters, i removed my red 300 tdi rear clusters and the temp lights i had put in place of my bumper ones (ripped off my rear bumper off roading ;P)
i then got hold of some cluster wiring plugs
and took them apart
and fitted two wires into my current block that were missing, i pulled the bumper wiring back up from the bumper and connected the wires, (green is indicator and red is tail light) to the plug ignoring the two black wires from the bumper,
these are all the pics i had taken will add more, i also have 8 wires left over for adding to your connector if anyone wants some pm me
PS use a thin screwdriver to remove the wires from the block (to open the hinged area)
Last edited:
