Morten 1

Active Member

• Mar 22, 2013

• #1

Hello all.
As one of my headlights, Left/NS,seem to give the same amount of LUX as a candle light (see picture below), and the Norwegian MOT is coming up, I will change it. However, according to this thread, it's possible to change it WITH the bumper in place, could anyone else confirm?

It would def. same me a lot of time, first removing the bull bar, and then the bumper.. If it's possible, that would be perfect. Anyone know if me bull bar is a original LR model, or some aftermarked brand?

Found a thread with all the bolts and screws drawn on, I have saved it for future reference, IF the bumper needs to come of..

 

M

matt1295

New Member

• Mar 22, 2013

• #2

i took my drivers head light out a few weeks ago to get to my abs pump and i did it with the bumper on just had to use a pry bar to pry the bumper down so i could get my spanner on the bolt which is underneath the headlight

 

Morten 1

Active Member

• Mar 22, 2013

• #3

matt1295 said:

i took my drivers head light out a few weeks ago to get to my abs pump and i did it with the bumper on just had to use a pry bar to pry the bumper down so i could get my spanner on the bolt which is underneath the headlight

Click to expand...

Excellent news! Thanks for the reply. Did you loosen some of the bolts securing the bumper first?

 

M

matt1295

New Member

• Mar 22, 2013

• #4

yes the 2 on the top that was it

 

J

JRNORWAY

Active Member

• Mar 22, 2013

• #5

Hei Morten,
Looks like the STC7933/34 from Land Rover. About the headlight removal i dont know.

 

Morten 1

Active Member

• Mar 22, 2013

• #6

matt1295 said:

yes the 2 on the top that was it

Click to expand...

Thank you mate, I'll give it a go.

 

Morten 1

Active Member

• Mar 22, 2013

• #7

JRNORWAY said:

Hei Morten,
Looks like the STC7933/34 from Land Rover. About the headlight removal i dont know.

Click to expand...

Thank you! Kjekt å vite!