ForceyBoy

Member
Hi All,

Noticed two drops of oil on the drive today.

So had a look under the engine and one is coming from the sump - so need a new plug there (suggestions/links welcome).

The second leak, is a little more! I've taken pictures from underneath and above - any advice is more than welcome as still new to the world of TD5 90's.

Also I had a further look round and there seems to be alot from the crankshank pulley (hope I've identified that right.

Put please have a look at the pictures and any advice/recommendations you all have.

Thanks in advance!
 

Attachments

  • tempImage1cBOpE.png
    tempImage1cBOpE.png
    2.9 MB · Views: 29
  • tempImageTBGZ77.png
    tempImageTBGZ77.png
    2.3 MB · Views: 24
  • tempImageVK02Ta.png
    tempImageVK02Ta.png
    3.1 MB · Views: 29
  • tempImageKaNcYz.png
    tempImageKaNcYz.png
    2.6 MB · Views: 27
  • tempImageVCjDex.png
    tempImageVCjDex.png
    2.7 MB · Views: 27
  • tempImagerTIZmv.png
    tempImagerTIZmv.png
    3 MB · Views: 30
Thinking on I've bought a new seal for the crankshank pulley, and clean it all down this weekend along with the other 'oily' bits, which fingers crossed will help see things more clearly!

But if anyone has thoughts on the oil leak around the pipes then let me know!
 
Camshaft front cover/grommet/seal on front of head.
Rocker cover gasket.
Fuel pressure regulator
Power steering pump.
Clean it all off with brake cleaner and start from the top down.
Two different rocker cover gaskets depending on the year.
 
Camshaft front cover/grommet/seal on front of head.
Rocker cover gasket.
Fuel pressure regulator
Power steering pump.
Clean it all off with brake cleaner and start from the top down.
Two different rocker cover gaskets depending on the year.

Bearing in mind that by driving it , the wind can push oil in a lot of places ...
 
Camshaft front cover/grommet/seal on front of head.
Rocker cover gasket.
Fuel pressure regulator
Power steering pump.
Clean it all off with brake cleaner and start from the top down.
Two different rocker cover gaskets depending on the year.
Thats great feedback - thank you. Are they all fairly simple(ish) jobs? Or are any more of a pig than another?

Also the year of the 90 is 1999 if that helps?
 

Similar threads