C

ClassikFan

Active Member

• Jul 6, 2016

• #1

Hi all
I'm fitting a Valeo parking sensor to my TD5. Got the bumper off and marked out where to drill the 4 holes for the little eyes, next step is to get the cables into the car.
I need to find an aperture to put the reverse sensor cable from near the back of the bumper into the bodywork around the rear light cluster. Is there an existing hole I can utilise?

 

biggeeeee

Retired - Living the dream

• Jul 6, 2016

• #2

The Land Rover wiring for the tow bar, is routed up the rear offside.
There is a plug for it just below the rear light cluster on the offiside body.
Its accessed by removing the light cluster and there is a channel from below the bumper up to the light.
I presume the nearside will be the same.

 

C

ClassikFan

Active Member

• Jul 6, 2016

• #3

Thanks Bigeeeee, I'll have a look in the morning.

 

biggeeeee

Retired - Living the dream

• Jul 6, 2016

• #4

From RAVE

 

C

ClassikFan

Active Member

• Jul 6, 2016

• #5

Just been out to have a look and it looks easy to connect a live and earth for the reversing light, just need to find a 12v feed beyond the grommet.

 

C

ClassikFan

Active Member

• Jul 7, 2016

• #6

All done today, thanks for the pointers Bigeee