abcdedd

New Member

• Jan 19, 2014

• #1

Hi guys, wondered if anyone might know..

on the bottom of the bulkhead there are the little mounts that the bolt then goes through to connect it to the outrigger, wondered if these are replaceable? 1992 plate defender..

If they are replaceable, anyone know a part number or anything?

Thanks alot!

 

jamesmartin

Well-Known Member

• Jan 20, 2014

• #2

more info , there are the bolts that secure bulkhead to outriggers and bracket that support bulkhead from chassis rail

 

abcdedd

New Member

• Jan 20, 2014

• #3

Its what sits next to the outrigger that the long bolt goes though, mine is quite rotten and could do with renewal..

 

jamesmartin

Well-Known Member

• Jan 20, 2014

• #4

try yrm metal solutions they do them amongst others

 

abcdedd

New Member

• Jan 20, 2014

• #5

Ah, just found the bulkhead feet, i assume this must be the part i need... They look like they are bolt in and out?!

 

jamesmartin

Well-Known Member

• Jan 20, 2014

• #6

yes if not the entire pillar and they are welded in

 

abcdedd

New Member

• Jan 20, 2014

• #7

Its weird, they look like they are only held in by the hinge bolts?

 

jamesmartin

Well-Known Member

• Jan 20, 2014

• #8

abcdedd said:

Its weird, they look like they are only held in by the hinge bolts?

Click to expand...

they are for hinge bolts,but they are welded in

 

abcdedd

New Member

• Jan 20, 2014

• #9

Ahright fair enough, although its not a thick metal, so leaves me wondering, when using a piece like this, does it require the bottom of the bulk head being chopped out, or ground back to clean metal for this to then be slotted over the top and then welded?