B

bigditch

New Member

• Dec 23, 2007

• #1

Have put big tyres on disco series 1 200tdi. Now rubbing on lock. What do I do to stop this and how?

Thanks from new person

Ps Merry xmas

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 23, 2007

• #2

Adjust the steering lock stops.

 

iannotts

New Member

• Dec 23, 2007

• #3

There is a bolt that stick out of the hubs that rescrict the steering, undo the lock nut and undo the bolt. ( Makeing the stop longer)till the oposite wheel dont catch then do the same on the other side.

BTW makes it a total pain in the arse to park

Had to do same on mine

 

B

bigditch

New Member

• Dec 23, 2007

• #4

Thanks for that. Have found a workshop manual download via a member so now have a clue (?). Would putting wheel spacers on have any effect?

Ta

 

iannotts

New Member

• Dec 23, 2007

• #5

It would yea but remember you have to put a spacer on all 4 wheels,

Plus why pay a couple of hundred quid for some spacers.

Also when you put the spacers on you move the wheel to nearer the wing so that may cause another problem.

 

S

slob

Well-Known Member

• Dec 23, 2007

• #6

and yer spacers increase the wear rate of yer wheel bearings etc

 

B

bigditch

New Member

• Dec 23, 2007

• #7

Thankyou all. Steering stops it is then. Will attempt over the festive (?) period. If the weather here in Manchester improves (yeah right).

Next question.
Front seats are not well at all. Plenty on flea-bay but not for series 1 200tdi 3dr. Will any later model seats fit in or only the type I have?

Ta very much.