wiltshire landyman

wiltshire landyman

I’m back
just thought i would share the before and after piccys,taken me a year to get and it where i am happy with it

Photo-0038.jpg


Photo-0008.jpg
 
At least you got rid of them stoopid wheels and the rubbish stripe up the side.....Looks a lot better......
 
mmmm..dont mention the fookin stripe...

striped all the paint cleanly of the feckin doors when i took em off,sprayed em with aerosol for the mo and i leave it dirty so you cant tell.

im respraying it in the next couple of weeks when i can make me mind up on colour
 
the roof bar in the last pic i have just replaced with a first four version as in the 1st piccy.it sits a lot lower and i think it looks better
 
What make is the aftermarket brick handbrake? Is it as good as the x-brake conversion?:rolleyes::p
 
ratty said:
What make is the aftermarket brick handbrake? Is it as good as the x-brake conversion?:rolleyes::p
Click to expand...

ther sound mate, :p i have one on my 90, and my series 2 , recently fitted them to a couple of my trailers too, well priced and reliable, easily replacable, no tools required, what more do yer want !:D
 
ratty said:
What make is the aftermarket brick handbrake? Is it as good as the x-brake conversion?:rolleyes::p
Click to expand...


:hysterically_laughi Excellent

Nice motor Wiltshire, Not sure about the roof lights, think the black rectangular ones are better. But the rest looks great.

I'm hunting stainless rock and tree sliders at the moment, been quoted £500 so far and so may have to settle for black coated ones.
 
jzcktv said:
:hysterically_laughi Excellent

Nice motor Wiltshire, Not sure about the roof lights, think the black rectangular ones are better. But the rest looks great.

I'm hunting stainless rock and tree sliders at the moment, been quoted £500 so far and so may have to settle for black coated ones.
Click to expand...

I believe Iannotts is about to start doing rocksliders. It may be worth sending him a pm.;)
 
jzcktv said:
:hysterically_laughi Excellent

Nice motor Wiltshire, Not sure about the roof lights, think the black rectangular ones are better. But the rest looks great.

I'm hunting stainless rock and tree sliders at the moment, been quoted £500 so far and so may have to settle for black coated ones.
Click to expand...

used to have rectangular roof lights,there ok if you wanna light up your bonnet and about 10ft in front of your landy,the ones on at the mo give a massive long throw pencil beam light and certainly light up a huge distance in front of ya,im happy wiv them now as this is the 4th set of roof lights i have tried,

my rock sliders were an ebay bargain,there heavy duty ones and brand new inc postage i paid £100!!! well happy wiv that.

can i ask why you want stainless sliders?
surely there gonna get scratched and bashed about?
unless its for the school run of course:D
 
Is the winch and light set up on the front an issue with air flow into the radiator? Don't suppose its an issue if you don't do long journeys.
 
steve-o said:
Is the winch and light set up on the front an issue with air flow into the radiator? Don't suppose its an issue if you don't do long journeys.
Click to expand...

I had a leccy winch with bridged solenoid on my 300tdi ( It's higher than a standard winch) and I also had the number plate fitted to the grill. The only problem I ever had with cooling was due to me blocking the radiator with mud on salisbury plain.
 
Re your stripes, have you tried using a hair dryer to melt the glue? takes time but i've done it on others and they come off cleanly
 
You must log in or register to reply here.

Similar threads

C
Diff lock stuck after clutch arm
Replies
4
Views
435
Scooby22
Scooby22
DPG213
2.4 TDCI intermittent idling issue
Replies
0
Views
215
DPG213
DPG213
Z
Complete rewiring Land Rover 90
Replies
9
Views
907
Ziva
Z
Blob
LR Workshop Manual alternative to Topix
Replies
5
Views
719
bluedog333
bluedog333
J
Big End bearings
2
Replies
32
Views
2K
JCP123
J