C

climbingmike

New Member
Hello All

I fitted a snorcle today and disconcted my winch. I had the battery disconected all day. Now what I try and start it I get the battery warning light and it wont start. It turns over fine, but doesnt go, not ever almost. It is like there is no fuel or some thing????

Any help would be :welcome2:

Many thanks
Mike
 
What engine is it?

try pressing the top of the little red or black inertia switch.;)
 
It'll look summit like this but may be in red or black.

36L011A_3.JPG
 
I thought I knew my way arroung my disco. Thats the secound thing I dont know in 5mins lol

Whats the "stop solinoid" and ware would the wire be connected?

Thanks
Mike
 
It's the fuel stop solenoid to cut the fuel and therefore your engine when you turn the ignition off. It'll be located underneath and towards the back of your fuel pump.

What year is your landy? is it manual or auto? It may have a single spade connector, it could have a 3 wire system.

IT IS NOT THE 3 WIRES ON TOP OF THE PUMP. THAT IS FOR THE EGR VALVE.
 
Its a 98 Auto. I also disconnected the the transmision temp sensoir. If I didnt reconnect it correctly would that stop it starting?
 
climbingmike said:
Its a 98 Auto. I also disconnected the the transmision temp sensoir. If I didnt reconnect it correctly would that stop it starting?
Click to expand...

Did you check the inertia switch then? 98 auto will have a digital solenoid
 
You must log in or register to reply here.

Similar threads

B
Died on motorway and won't start
2
Replies
38
Views
2K
Stanleysteamer
Stanleysteamer
J
td5 non start - No fuel pump power, No ecu Light, Nanocom cant communicate with ecu
Replies
8
Views
730
Stanleysteamer
Stanleysteamer
O
Disco 2 immobiliser/central locking issues
Replies
9
Views
847
Ollie_Mif
O
M
Td5 immobilised after battery change
Replies
4
Views
913
Landmark2
Landmark2
P7XES
Discovery 4 wont start click
Replies
9
Views
1K
yfo866
yfo866