lenb said:

Does anyone know what the wire rating and fuse size is on the 12S electrics side - pin 4? I have located the spare socket on LH rear of vehicle.
I've tried a search but can't find what I'm looking for.

About to fit 12S electrics and I would like to be certain that the 20amp that ATC draws is ok for my P38.

Cheers

Click to expand...

Datatek said:

No way. I ran a fused 4mm direct from the battery via a relay so that it switched with the ignition.

Click to expand...

lenb said:

So would I connect the 4mm direct to pin 4 connection along with the standard wire, or remove standard wire and tape up leaving 4mm on its own?

Click to expand...

Datatek said:

Not sure on 12S, we use a 13 pin connector over here and the standard switched wire is used along with the heavy duty line.
you could use the standard wire to operate the relay to switch the 4mm.
Google 12s and it will give you the options with a bit of searching.

Click to expand...