how to get the transfere box bearing out from behind the flange>??????
the shaft, flange, seal, and circlip have been removed but the bearing wont budge, out bearing ring is sieazed and so is the inner ring to the shaft????????

not a bearing puller small enough to fit between the 2 rings?????????
tried bashing
prising
praying, think am gonna try drilling at it to hopefully smash it.

please help!

craig.

I have never done this job but according to the LR manual it would appear that you remove the rear output housing and having removed the retaining circlip ( which you say you have already done ) you support the housing on blocks of wood and then drift out the bearing .
Hope this helps - or I may have taken you up wrong.