A

andrew j

New Member
just changed the gearbox in my p38 filled back up to the correct level but it seems to be in top gear when you pull off , you cant feel it change up nor can you hear it go up the gears even when you try to shift up manually there is no difference it is the same in high or low range any ideas anyone ?!:scratching_chin: :confused2: :confused2: maddening part its cluttering my mates garage dont want to :argue: :argue: :boxing: :boxing: hes bigger than me plez elp hes started to growl now !. not good ;)
 
could it be that you have done such a good job that the gear changes are seamless

or you could try having a look on the rave cd for the correct procedure or diagnosis of faults, see if you have overlooked anything????
 
you need to get it on the diagnostics as it sounds like the ecu as picked up a fault and put it into limp home mode? ;)
 
cheers mark i thought that my self but nothing comes up about limp home mode on the dash and the screen doesnt show wat gear youve selected my sport mode wont light up either
 
You must log in or register to reply here.

Similar threads

O
P38A Select neutral message, stuck in Low.
Replies
10
Views
1K
Offie
O
D
Auto Gears Not engaging properly after front end jackup
Replies
6
Views
683
daviesM
D
BDC
P38 dse engine disabled
5 6 7
Replies
130
Views
11K
RangeRoller dt
RangeRoller dt
T
Auto Box Wont stay in Gear
Replies
11
Views
2K
Graculus
Graculus
Wonky Donky 49
Power steering
Replies
1
Views
490
Wonky Donky 49
Wonky Donky 49