This is a re- post more because this is the right section.

Well as of yesterday my disco has desided that it is getting broken into. I have tried all that I know ( that's not much ) to figure out what is fooked.

So any way to the question, is it Posable to by pass the alarm/ immobiliser on a 300 Tdi auto discovery? and how?


I have changed the battery's in the fobs.
I have used the key coad On the drivers door it shuts the alarm up but it's still wont start.
Got in shut all doors closed all windows and gave it 5 min.
Took the battery off over night.

I know that some will think whate a min are you trying to nick some discos ( yes I have a fetish for rust and descoverys are the best place to find it ) but it happend yesterday when laining with others from here and again just before I got home.


Idid a search and came up with not much other than spider bypass

U say what you have done but not what your problem is.
"Spider bypass" is the immobiliser bypass so will get the engine running, didn't what ever you found tell you how?

Is fixed after some help from Ratty and Brian.

Turns out the green control box was full of crap and the earth for the relay was crap.

Discool I did state that there was a problam with the alarm/immobaliser. No what I found did not. I can understand why it would not be there as a step by step as this is a major security component.