S

shaunm41

New Member

• Apr 8, 2013

• #1

Anyone know how I can fix this?

 

Datatek

Well-Known Member

• Apr 8, 2013

• #2

Check the yellow connectors under the seat, common problem.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 8, 2013

• #3

Common fault is the yellow harness under the seat becomes loose....

Check under the seats and check the yellow connectors to the seats and seat belt mounts

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 8, 2013

• #4

Datatek said:

Check the yellow connectors under the seat, common problem.

Click to expand...

Same posting time - you beat me by seconds!!

 

S

shaunm41

New Member

• Apr 8, 2013

• #5

Cheers. Will have a look tomorrow.

I'm asking so many questions on here. I'm going to have to make a contribution when I find something I know enough about. Lol.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 8, 2013

• #6

shaunm41 said:

Cheers. Will have a look tomorrow.

I'm asking so many questions on here. I'm going to have to make a contribution when I find something I know enough about. Lol.

Click to expand...

You'll get there bud...

(hint - use the donate button )

 

S

shaunm41

New Member

• Apr 8, 2013

• #7

Lol yeah I will have a look at that

 

S

shaunm41

New Member

• Apr 8, 2013

• #8

Also I get an intermittent "traction failure" fault and the traction light coming on solid

But the nanocom picks up no faults ??

And the nanocom won't talk to the eas ecu...

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 8, 2013

• #9

Low Battery Volts causes that - your battery may be getting tired!

 

S

shaunm41

New Member

• Apr 9, 2013

• #10

It's a new battery mate. One recommended by datatek from the battery megastore

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 9, 2013

• #11

shaunm41 said:

It's a new battery mate. One recommended by datatek from the battery megastore

Click to expand...

Oh....then erm....hmmm....

The Traction Control system on the P38 uses the Braking system to retard a spinning wheel to allow the wheel with traction to get the power - very simplistic.

So if it is playing around, I'd start looking at the Hydraulic Boost Pump operation and also check the ABS sensors are all seated correctly!

Check the Brake system for air by re-bleeding the system (Follow RAVE to the letter).