G Gunny New Member Sep 7, 2012 #1 Probably covered before but I cant find any imfo on my question, What is the best way to remove the two long bolts that hold the ball joint to the Aframe, mine appear to be sized as was the ball joint nut, now in bits
Probably covered before but I cant find any imfo on my question, What is the best way to remove the two long bolts that hold the ball joint to the Aframe, mine appear to be sized as was the ball joint nut, now in bits
Mr Noisy Coming in your ears. Sep 7, 2012 #2 Socket on one end and a spanner on the other Or cut them off, but then you'll need new bolts, as i did!
Socket on one end and a spanner on the other Or cut them off, but then you'll need new bolts, as i did!
G Gunny New Member Sep 7, 2012 #3 Thanks for the reply. I soaked the whole think in WD and just kept hitting the frame both sides and eventually one came loose then the other.
Thanks for the reply. I soaked the whole think in WD and just kept hitting the frame both sides and eventually one came loose then the other.
discool Well-Known Member Sep 7, 2012 #4 You require an easing oil such as Plusgas, WD is just that a water dispersant which vaporises after a short while.
You require an easing oil such as Plusgas, WD is just that a water dispersant which vaporises after a short while.
