V8i disco 1996

I used the "blink method to interrogate the ABS ecu and one of the codes was 4, 14 but this code is not listed.

"14" codes all apprear to be related to the front left wheel sensor.

Also got a code for brake pedal position, is this a common or intermittent fault or do I need to replace the switch?

Is there a knack in setting up the new switch ie. plunger to pedal position.
any comments appreciated.

Mark

All sorted the 4-14 code although not listed is related to front left wheel.
Checked the resistance on that wheel sensor and got no reading, changed the sensor, cleared the 4-14 code and happy days.

to set the brake pedal switch - pull the plunger right out, fit the switch, the pedal automatically adjusts the plunger position, job done

Thanks I worked it out ok just had to remember to pull the red collar out to remove and replace switch then push red collar back in to secure.