currymunster

Well-Known Member

• Aug 21, 2018

• #1

Hi everyone,
does anyone know if a 1995 110Defender back box and mid box are interchangable
with a 1995 300Tdi Discover??

 

jamesmartin

Well-Known Member

• Aug 21, 2018

• #2

no only down pipe

 

currymunster

Well-Known Member

• Aug 21, 2018

• #3

jamesmartin said:

no only down pipe

Click to expand...

Oh Crap!!!!
Disco exhaust got hole in just behind centre box and looks like it will be a bitch to seperate from rear section.
have 110 rear and centre in garage!!!
Cheers James.
While your about - Doing cambelt on Disco and have bought early kit for it
Vin is TA. is that correct???

 

jamesmartin

Well-Known Member

• Aug 21, 2018

• #4

currymunster said:

Oh Crap!!!!
Disco exhaust got hole in just behind centre box and looks like it will be a bitch to seperate from rear section.
have 110 rear and centre in garage!!!
Cheers James.
While your about - Doing cambelt on Disco and have bought early kit for it
Vin is TA. is that correct???

Click to expand...

belt will be right maybe tensioner won be

 

currymunster

Well-Known Member

• Aug 21, 2018

• #5

Oh, this one has both the lips and can't see the infamous yellow paint. Also I don't have the correct torque wrench to tension it, any sneaky cheats?

 

jamesmartin

Well-Known Member

• Aug 21, 2018

• #6

dont fit it ,and what does your std torque wrench go down to

 

currymunster

Well-Known Member

• Aug 22, 2018

• #7

jamesmartin said:

dont fit it ,and what does your std torque wrench go down to

Click to expand...

Std micro click wrench goes down to 28nm which I believe is far too high? Isn't it 11 plus 90degrees?
If I don't fit the tensioner will the bearing last?

 

currymunster

Well-Known Member

• Aug 22, 2018

• #8

Scrub the 90 degrees - getting tired. That's the crank pulley

 

jamesmartin

Well-Known Member

• Aug 22, 2018

• #9

currymunster said:

Scrub the 90 degrees - getting tired. That's the crank pulley

Click to expand...

crank pulley should have lips not the tensioner

 

currymunster

Well-Known Member

• Aug 22, 2018

• #10

jamesmartin said:

crank pulley should have lips not the tensioner

Click to expand...

8
This new one has lips and the idler does not. No idea what the car has fitted till I remove the cover. Torque wrench goes down to 28nm