Morning all... just wanted some conformation before i order bits.

My clutch pedal on my d1 is playing up.

It sticks down about 1/2 way, but it seems the first 1/2 of the pedal is just floppy, as if the cylinders are knackered.

Am going to order a new slave and master cyl for the clutch?

cheers

kev

Just checked, master cyl reservoir is empty Must have a leak somewhere, its not in the cab, or anywhere near master cyl so im guessing its the slave. One on order, fitting it tomorrow.

Change both as I've heard that once one leaks you change it then the other goes soon after! Might be worth buying good quality parts too, all in all they ain't bad jobs to do,

Good luck

Did it saturday, pain in the arse! Sent me the wrong master cyl and the wrong slave.. lucky i was able to remove the piston from the old slave cyl, clean it up and fit the piston and slave from the new one (the only difference with the new slave was the thread was different for where the fluid line connects... grrr!)

All done now.. i have clutch. What a pain in the arse to bleed too... and i got an oil leak so got covered in oil..

Grim...