2_stroke
New Member
hey the all, on saturday and sunday last week we took a ruined perkins 2.5n/a out of an f reg 90, to put the 200 tdi in.
im not sure it should have had this engne in it anway bit i may be wrong as i oftern am
it all went rather well realy, the loom even swapped over quite well its just the pipework thats a devil, we put the new rad in fine and addapted the banjos on some oil cooler pipes to fit just about so it going together in a fashion...
you see i dont want to bodge things so thay just work, i would like it to be smartish atleast, so i wonderered if anyone could advise me on intercooler / rad / matrix / oil cooler pipework.
PS the engine is from a disco so we`ve already had to create an exhaust to fit, thants why we're having all these little orkward jobs
many thamks for any advice,
Edd
im not sure it should have had this engne in it anway bit i may be wrong as i oftern am
it all went rather well realy, the loom even swapped over quite well its just the pipework thats a devil, we put the new rad in fine and addapted the banjos on some oil cooler pipes to fit just about so it going together in a fashion...
you see i dont want to bodge things so thay just work, i would like it to be smartish atleast, so i wonderered if anyone could advise me on intercooler / rad / matrix / oil cooler pipework.
PS the engine is from a disco so we`ve already had to create an exhaust to fit, thants why we're having all these little orkward jobs
many thamks for any advice,
Edd
