john2000

New Member

• Mar 7, 2009

• #1

the place i bought this from installed coils.(air was bad) and they were sopos to take care of this but sence i talked him down on the price he said he wouldnt do it so how can i fix this. please help its ****ing me off wit the dinging every time u start it.

 

A

andy 0352

New Member

• Mar 7, 2009

• #2

see if these guys would send one of these over to you,don,t know on cost but should do the job


Manual Suspension Override - Range Rover P38 - eas air on eBay, also, Range Rover, Car Parts, Cars, Parts Vehicles (end time 01-Apr-09 16:44:02 BST)

 

john2000

New Member

• Mar 7, 2009

• #3

i thought there was a way to jump out the pins on some plug at least thats what i hear

 

SpudH

Well-Known Member

• Mar 7, 2009

• #4

There is a simple way of doing with a jumper wire on the ECU socket under the passenger seat. Check out Rangerovers.net for the connections to jumper.

 

R

Ratae

Well-Known Member

• Mar 8, 2009

• #5

coilconv4 might help.

 

john2000

New Member

• Mar 8, 2009

• #6

Well whats the differince between using the wire jumper and installing the thing they sell 4 it? I dont want to jump it out and have prob. Wit the becm or it not pass emissons test so should i just suck it up and buy it or does it do the same thing as a jumper. IM KINDA LOST. AND ALSO THERES NO SHOCKS IN THE FRONT AND I DIDNT SEE ANY PLACE WARE THEY WOULD GO AND IT SEEMS KINDA BOUNCY DO I HAVE TO FAB UP SOME BRACKETS 4 THEM OR IS THERE A SPOT 4 THEM THAT I MISSED.

 

Last edited: Mar 8, 2009