nickliv

Active Member

• Dec 27, 2008

• #1

All of them, From the tank, all round the engine bay, to the injector pump.

Looked on the 'addocks, but can't seem to locate the required. Don't fancy going into LR main agent with my special bunning trousers on.

Any ideas? Anyone breaking one?

Cheers.

 

B

boydy1989

Well-Known Member

• Dec 28, 2008

• #2

make em! Or are u missing the unions too?

 

D

discomania

Well-Known Member

• Dec 28, 2008

• #3

Get the pipe and the unions from a good parts supplyer, and make them all up..

Simpson supplies do diesel stuff, you can get all the bits you need, or see if there is anywhere local that has them (bound to be).

 

nickliv

Active Member

• Dec 28, 2008

• #4

boydy1989 said:

make em! Or are u missing the unions too?

Click to expand...

no, I've got the unions, but foolishly thought that the fuel lines were a 'sealed unit' type of arrangement.

I shall break out the stanley knife and jubilee clips forthwith.

 

B

boydy1989

Well-Known Member

• Dec 28, 2008

• #5

I used some rubber fuel pipe stuff from blackwells hydraulics, and they supplied me with some funny crimp tight connectors, like a ring with lugs on it, you squeeze the lugs to crimp. They work really well too!