davidcorden02

New Member

• Oct 17, 2011

• #1

Hi all my Landy seems to have a lean down on drivers side. I've been told that the springs are handed tall on the drivers side coz of the transfer box weight and short on the pass side is this true? And swapping them over from pass side to drivers side vice verser will it rectify the problem cheers Dave.

 

Dr_evil

Banned

• Oct 17, 2011

• #2

Yarp, drivers have longer springs


Then again they could be the right way round and they're just worn out

 

jamesmartin

Well-Known Member

• Oct 17, 2011

• #3

most lift springs i fit are the same on both sides just differ front back (shorter front)

 

West Slope Rover

Well-Known Member

• Oct 17, 2011

• #4

I was talking to the chap I from whom I purchased my RRC and he said the mechanic who put the coil conversion on mine told him that the driver side was beefed up for some reason technical. That reason I do not know. Big bummed driver?

 

Dr_evil

Banned

• Oct 17, 2011

• #5

West Slope Rover said:

I was talking to the chap I from whom I purchased my RRC and he said the mechanic who put the coil conversion on mine told him that the driver side was beefed up for some reason technical. That reason I do not know. Big bummed driver?

Click to expand...

Cope with all them old fatties

 

West Slope Rover

Well-Known Member

• Oct 17, 2011

• #6

Dr_evil said:

Cope with all them old fatties

Click to expand...

I'm a fit 5'11'' and 185 pounds, thank you! I'm gonna find another doctor.

 

Dr_evil

Banned

• Oct 17, 2011

• #7

West Slope Rover said:

I'm a fit 5'11'' and 185 pounds, thank you! I'm gonna find another doctor.

Click to expand...

I'm not licensed to practice anyway so probs a good idea

 

davidcorden02

New Member

• Oct 17, 2011

• #8

Cheers all lol