pwood999

Well-Known Member

Full Member

• Sep 2, 2019

• #1

Guys, Two questions:

1. Anyone know where I can get replacement O2 Sensor connectors, or the manufacturer for the grey connector type ?
2. Part number or size of the oil filler neck o-ring ? Mine is a bit squashed & broken to measure properly.

Thanks,
Pete

 

Henry_b

Think outside, no box required.

• Sep 2, 2019

• #2

You can wire O2 sensors up without the connector,

And the oil filler neck can be had off or rimmers or beermat.

 

pwood999

Well-Known Member

Full Member

• Sep 2, 2019

• #3

Henry,
I would rather get the connector in case I need to change sensors later. Soldering under the car will be no fun !!

Don't want the complete filler, just the o-rings.

 

RangeRoller dt

Well-Sprung Member

• Sep 3, 2019

• #4

Beer mat - I love it

 

wammers

No longer with us, RIP

Donater

• Sep 3, 2019

• #5

Henry_b said:

You can wire O2 sensors up without the connector,

And the oil filler neck can be had off or rimmers or beermat.

Click to expand...

Or anywhere that sells O'rings.

 

Henry_b

Think outside, no box required.

• Sep 3, 2019

• #6

wammers said:

Or anywhere that sells O'rings.

Click to expand...

or some teflon tape

 

RangeRoller dt

Well-Sprung Member

• Sep 3, 2019

• #7

Take the neck part with you to the motor factors, for 30p you can get a range of similar sizes and see what fits best when you get home and have spares.