B

bg_freelander

Active Member

• Apr 11, 2012

• #1

Hello!

Im planning to fit the factory fog lamps in the bumper MY04 facelift. Does anybody know if the bumper has holes pre -punched from the inner side?

Cheers

 

robint

Well-Known Member

• Apr 11, 2012

• #2

can you not kneel down on the floor and have a look for your self , it ant rocket science .........

 

B

bg_freelander

Active Member

• Apr 11, 2012

• #3

No it can not be seen

 

cox325

Active Member

• Apr 11, 2012

• #4

take the bumper off........... my 03 pre face lift had the indent to cut out.

 

Singvogel

Well-Known Member

• Apr 11, 2012

• #5

bg_freelander said:

Hello!

Im planning to fit the factory fog lamps in the bumper MY04 facelift. Does anybody know if the bumper has holes pre -punched from the inner side?

Cheers

Click to expand...

As far as I understand - once you have the front bumper off you will see the elliptical outline that has to be cut out, marked clearly on the inner side.

My mate did a tidy job by drilling a small hole and using a fine-tooth key-hole saw.

The exact position of the little retaining lug cut-out is very important to get right.

Caio,

Singvogel. :cool2:

 

B

bg_freelander

Active Member

• Apr 12, 2012

• #6

Singvogel said:

As far as I understand - once you have the front bumper off you will see the elliptical outline that has to be cut out, marked clearly on the inner side.

My mate did a tidy job by drilling a small hole and using a fine-tooth key-hole saw.

The exact position of the little retaining lug cut-out is very important to get right.

Caio,

Singvogel. :cool2:

Click to expand...

Many thanks for the replies!

Then the only thing i need are the fog lamps,fog surrounds, the switch and eventually the wiring loom..?

Cheers