[iannotts]

A set of my rock slider for the 110 , sure David will be more than happy with them

bit of a test lift

What do you think?

 

[nathan5346]

I got sum ov them mine um galvanised

 

[iannotts]

I got sum ov them mine um galvanised

you sure they like them Nath

 

[Trewey]

Need galvanising and some end-caps on the box section.
Apart from that, they look good / well made.

 

[ratty]

how much does it cost to galvy summit like a pair of sliders?

 

[iannotts]

Need galvanising and some end-caps on the box section.
Apart from that, they look good / well made.

they have got the end caps on mow just not got a piccys yet, i see you both said galv, that will push up the price but not enhance the slider. Soon as you hit a sharp rock the finish will be scratched.

Trew, hopefully get them dimensions soon so I can do yours for you

 

[nathan5346]

you sure they like them Nath

Thort they was just had a look and they nuffin like em

 

[Trewey]

they have got the end caps on mow just not got a piccys yet, i see you both said galv, that will push up the price but not enhance the slider. Soon as you hit a sharp rock the finish will be scratched.

If they're dipped proper, it'll be a lot tougher than powder coating.
I'd pay a bit extra for a decent galv finish.

 

[iannotts]

If they're dipped proper, it'll be a lot tougher than powder coating.
I'd pay a bit extra for a decent galv finish.

Ok mate, I'll get some quotes on the galv

 

[ratty]

they have got the end caps on mow just not got a piccys yet, i see you both said galv, that will push up the price but not enhance the slider. Soon as you hit a sharp rock the finish will be scratched.

Trew, hopefully get them dimensions soon so I can do yours for you

Oi!!

If yer gonna make other peeps some can yer make me some too pretty please?

I int got a tube bender so I'd have to cut and weld the slider ends if I make my own.

 

[nathan5346]

Ok mate, I'll get some quotes on the galv

Albion galvanisers Oldbury

 

[iannotts]

Oi!!

If yer gonna make other peeps some can yer make me some too pretty please?

I int got a tube bender so I'd have to cut and weld the slider ends if I make my own.

PM sent

 

[iannotts]

Albion galvanisers Oldbury

Cheers but they are too far away, need to be local so I can drop off and collect to keep pricing down

 

[ratty]

PM sent

pm received.

 

[slim jim]

Very nice, how much with out the galv?

 

[iannotts]

Very nice, how much with out the galv?

Pm sent

 

[SHORT ROUND]

i know the ones in the piccy are on a 110 but can you make any of these for a discovery 1 mate, if so can you send me a price un-galved and un-painted please mate

 

[iannotts]

A finished set fitted

 

[90boy]

A finished set fitted

that looks smart mate

 

[fanatic]

smart